Opli

New Class of ‘Soft’ Semiconductors Could Transform HD Displays

Berkeley Lab researchers find tunable halide perovskites could usher in new generation of optoelectronic devices

Single nanowires shown emitting different colors

Single nanowires shown emitting different colors. The top panel shows a cesium lead bromide (CsPbBr3)-cesium lead chloride (CsPbCl3) heterojunction simultaneously emitting green and blue lights, respectively, under UV excitation. The bottom panel shows a cesium lead iodide (CsPbI3)-cesium lead bromide-cesium lead chloride configuration emitting red, green, and blue lights, respectively. (Credit: Letian Dou/Berkeley Lab and Connor G. Bischak/UC Berkeley)

SHARE:




JUNE 26, 2017

A new type of semiconductor may be coming to a high-definition display near you. Scientists at the Department of Energy’s Lawrence Berkeley National Laboratory (Berkeley Lab) have shown that a class of semiconductor called halide perovskites is capable of emitting multiple, bright colors from a single nanowire at resolutions as small as 500 nanometers.

The findings, published online this week in the early edition of the Proceedings of the National Academy of Sciences, represent a clear challenge to quantum dot displays that rely upon traditional semiconductor nanocrystals to emit light. It could also influence the development of new applications in optoelectronics, photovoltaics, nanoscopic lasers, and ultrasensitive photodetectors, among others.

The researchers used electron beam lithography to fabricate halide perovskite nanowire heterojunctions, the junction of two different semiconductors. In device applications, heterojunctions determine energy level and bandgap characteristics, and are therefore considered a key building block of modern electronics and photovoltaics.

The researchers pointed out that the lattice in halide perovskites is held together by ionic instead of covalent bonds. In ionic bonds, atoms of opposite charges are attracted and transfer electrons to each other. Covalent bonds, in contrast, occur when atoms share their electrons with each other.

“With inorganic halide perovskites, we can easily swap the anions in the ionic bonds while maintaining the single crystalline nature of the materials,” said study principal investigator Peidong Yang, senior faculty scientist at Berkeley Lab’s Materials Sciences Division. “This allows us to easily reconfigure the structure and composition of the material. That’s why halide perovskites are considered soft lattice semiconductors. Covalent bonds, in contrast, are relatively robust and require more energy to change. Our study basically showed that we can pretty much change the composition of any segment of this soft semiconductor.”

A 2-D plate showing alternating cesium lead chloride and cesium lead bromide segments
A 2-D plate showing alternating cesium lead chloride (blue) and cesium lead bromide (green) segments. (Credit: Letian Dou/Berkeley Lab and Connor G. Bischak/UC Berkeley)

In this case, the researchers tested cesium lead halide perovskite, and then they used a common nanofabrication technique combined with anion exchange chemistry to swap out the halide ions to create cesium lead iodide, cesium lead bromide, and cesium lead chloride perovskites.

Each variation resulted in a different color emitted. Moreover, the researchers showed that multiple heterojunctions could be engineered on a single nanowire. They were able to achieve a pixel size down to 500 nanometers, and they determined that the color of the material was tunable throughout the entire range of visible light.

The researchers said that the chemical solution-processing technique used to treat this class of soft, ionic-bonded semiconductors is far simpler than methods used to manufacture traditional colloidal semiconductors.

“For conventional semiconductors, fabricating the junction is quite complicated and expensive,” said study co-lead author Letian Dou, who conducted the work as a postdoctoral fellow in Yang’s lab. “High temperatures and vacuum conditions are usually involved to control the materials’ growth and doping. Precisely controlling the materials composition and property is also challenging because conventional semiconductors are ‘hard’ due to strong covalent bonding.”

To swap the anions in a soft semiconductor, the material is soaked in a special chemical solution at room temperature.

“It’s a simple process, and it is very easy to scale up,” said Yang, who is also a professor of chemistry at UC Berkeley. “You don’t need to spend long hours in a clean room, and you don’t need high temperatures.”

The researchers are continuing to improve the resolution of these soft semiconductors, and are working to integrate them into an electric circuit.

Other co-lead authors on this paper are Christopher Kley, UC Berkeley postdoctoral fellow, and Minliang Lai, UC Berkeley graduate student. Dou is now an assistant professor of chemical engineering at Purdue University.

The DOE Office of Science supported this work.

###

Lawrence Berkeley National Laboratory addresses the world’s most urgent scientific challenges by advancing sustainable energy, protecting human health, creating new materials, and revealing the origin and fate of the universe. Founded in 1931, Berkeley Lab’s scientific expertise has been recognized with 13 Nobel Prizes. The University of California manages Berkeley Lab for the U.S. Department of Energy’s Office of Science. For more, visit www.lbl.gov.












Microsoft


Microsoft
Microsoft